Brother BAS-311G List of memory switch settings, Function Settings, Initial value, range

			2. FUNCTION SETTINGS
2-4. List of memory switch settings
No.	Setting		Setting items	Initial value
	range
001	Work clamp lift timing after sewing is completed			ON
	OFF		Lifts at the final stitch position.
	ON		Lifts after moving to the home position.
	Separate-type	work clamp drop operation (pneumatic specifications)
002	0		Left and right work clamp drop at the same time.	0
	1		Work clamp drops in the order left → right.
	2		Work clamp drops in the order right → left.
	Work clamp drop operation (solenoid specifications)
	0		Analog dropping: Work clamp drops in direct proportion to the pedal depression
			amount, and sewing starts when the pedal is fully depressed
003	1		1st step drop: Work clamp drops when pedal is depressed to the 1st step, and	2
			sewing starts when pedal is depressed to the 2nd step
			2nd step drop: Work clamp drops to intermediate height when the pedal is
	2		depressed to the 1st step, and work clamp drops and sewing starts when the
			pedal is depressed to the 2nd step.
	Sewing start	speed
100	OFF		The sewing speed for the first 1 − 5 stitches is set by memory switch numbers 151	OFF
			− 155.
	ON		1st stitch at 400 rpm, 2nd stitch at 400 rpm, 3rd stitch at 600 rpm, 4th stitch at 900
			rpm, 5th stitch at 2,000 rpm
	Single-stitch	test feed
	OFF		Test feed starts when the foot switch (start switch) is depressed, and it continues
			automatically until the final stitch.
200			Test feed is carried out one stitch at a time when the foot switch (start switch) is	OFF
			depressed (feed becomes continuous if the foot switch [start switch] is
	ON		continuously depressed).
			In addition, when the TEST indicator is illuminated, test feeding will move forward
			one stitch at a time when the machine pulley is turned by hand.
300	Production counter display			OFF
	OFF		Lower thread counter display
	ON		Production counter display
400	User programs			OFF
	OFF		Disabled
	ON		User program mode is enabled.
401	Cycle programs			OFF
	OFF		Disabled
	ON		When sewing user programs, the set programs are sewn in numeric order.
402	Maximum reduction ratio (mm display) (*1)			OFF
	OFF		Displayed as %.
	ON		Displayed as mm.
	Split mode selection
403	0		Continuous split (split menu is disabled before split detection)	0
	1		Continuous split (split menu is always enabled)
	2		Independent split

*1 The mm display may differ slightly from the actual sewing size.

BAS-311G, BAS-326G 5