Brother BAS-311G Data read/write mode, Reading / Writing Data, Turn on the power switch

						3. READING / WRITING DATA
3-4. Data read/write mode
1					With the power turned off, insert the CF card into the CF
					slot.
					NOTE:
					•	Make sure the CF card is facing the correct way.
					• Always be sure to keep the cover closed except
						when inserting and removing the CF card. If this is
						not done, dust may get inside and cause problems
						with operation.
					•	If no valid data can be found, the CF media indicator
						will not illuminate.
				4453Q
2	Turn on the power switch.
3	Switch to data read/write mode.				While pressing the TEST key, press the R/W key.
					• The mode number will appear in the PROGRAM No.
					display, and the setting details for that mode will
					appear in the menu display.
					• The initial mode is sewing data reading mode. (Refer
					to the read/write mode list)
		TEST indicator and CF media indicator illuminate				4574Q
4					Press the or key to select the mode.
						4575Q
[Read/write mode list]
PROGRAM No.			Menu display			Setting items
	display
	r 1		[-SEd]	Sewing data is read from the CF card. (*1)
	w 2		[SEd-]	Sewing data is written to the CF card.
	r 3		[-MEM]	Memory switch settings are read from the CF card.
	w 4		[MEM-]	Memory switch settings are written to the CF card.
	r 5		[-UPG]	User programs are read from the CF card.
	w 6		[UPG-]	User programs are written to the CF card.
	r 7		[-SyS]	Control programs are read from the CF card and used to update the firmware version.
	w 8		[LoG-]	Error log data is written to the CF card.
	r 9		[-Fdd]	Sewing data is read from the floppy disk. (*2) (*3)
	w 10		[Fdd-]	Sewing data is written to the floppy disk. (*2)
	r 11		[-EoP]	Extended option output (*4) data is read from the CF card.
	w 12		[EoP-]	Extended option output data is written to the CF card.
	r 13		[oPFd]	Extended option output data is read from the floppy disk. (*2)

*1 The sewing data that can be use with this sewing machine is data that has been created for the BAS-311G/BAS-326G. *2 Only valid when using an optional floppy disk drive.

*3 Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read.

*4 Refer to the instruction manual for the programmer for details on extended option output.

BAS-311G, BAS-326G 25