Brother BAS-311G service manual X-Y feed home position, Adjustment, End adjustment mode

7. ADJUSTMENT

5		Press the RESET key.
		• The work clamp will move to the home position. Check
		the home position.
7	Repeat steps 4 and 5 to adjust the home position.
8	End adjustment mode.	Press the TEST key.
		• The display will return to the normal display and the
		sewing machine will switch to home position detection
		standby.
	TEST indicator switches off

NOTE:

Always be sure to press the RESET key and check the home position before ending adjustment mode. If you end adjustment mode without checking the home position, error "E303" may be generated.

7-20-2. X-Y feed home position

1	Turn the pulley to set the needle to the needle up stop position.
2			While pressing the		keys simultaneously, turn on
			the power switch.		keys until the model name is
			*	Keep pressing the
				displayed and the buzzer beeps once.
			•	"orG" will flash in the PROGRAM No. display and the
				offset value (default: 0) will be displayed in the menu
				display.
	TEST indicator and X-SCALE indicator light				5205Q 4443Q 4421Q
3			Press the SELECT key so that either the X-SCALE
			indicator or the Y-SCALE indicator illuminates.
					4570Q
4		Press the RESET key.
		• Home position detection will be carried out, and the feed mechanism will stop at the
		currently-registered home position.
		* If you press the RESET key for 2 seconds or more at this time, the offset value will be reset
		to “	0 ”.

BAS-311G, BAS-326G 105