Brother BAS-311G service manual Writing sewing data to floppy disks, Reading / Writing Data

3. READING / WRITING DATA

4 Press the R/W key.

	•	The buzzer will sound and the selected sewing data will be loaded
		from the floppy disk and copied into the sewing machine's internal
		memory.
	•	The program numbers that have been read will appear in the menu
		display.
	*	If there is a large volume of data in the floppy disk, it will take some
		time for all of it to be read.
		To halt the reading of data, press the STOP switch. If you then
		press the RESET key, the display will change back to [ ALL].
	NOTE:
		If there is no data in the selected program number, error [E421] will
		be displayed. Press the RESET key and then select another
		program number.
	Loading	5063Q
5 End data read/write mode	Press the TEST key.
	Turn off the power and remove the floppy disk.

TEST indicator switches off

3-14. Writing sewing data to floppy disks

1Insert the floppy disk into the floppy disk drive.

2 Select the [w 10] data read/write mode.

			5064Q
3	Press the R/W key.
	•	[Fdd-] will change to [ ALL].
	Press the		or key to select the program number to
	be written.
	*	If [ ALL] is selected, all sewing data will be written at
		once.
			4577Q

32 BAS-311G, BAS-326G