Symptom | Cause and/or Corrective Actions |
|
|
Image protection cannot be applied. | cWhen you are using the “Memory Stick Duo” with the |
| release the lock on the |
| |
| cPerform the operation again on the index screen. (p. 106) |
|
|
Cannot mark pictures for print. | cWhen you are using the “Memory Stick Duo” with the |
| release the lock on the |
| |
| cPerform the operation again on the index screen. (p. 107) |
| • The maximum number of pictures you can mark for print is 999. |
| • Movies cannot be marked for print. |
|
|
The data file name is not indicated | • Only the file name is displayed if the directory structure does not |
correctly. | conform to the universal standard. |
| • The file is damaged. |
| • The file format is not supported on your camcorder. (p. 125) |
|
|
The data file name flashes. | • The file is damaged. |
| • The file format is not supported on your camcorder. (p. 125) |
|
|
Dubbing/Editing
Symptom | Cause and/or Corrective Actions |
|
| |
|
|
|
|
|
Pictures from connected devices are | • Cannot change the setting of the AUDIO/VIDEO jack during Easy | |||
not displayed on the LCD screen or | Handycam operation. |
|
| |
the viewfinder. | cCancel Easy Handycam operation (p. 53), and then set [VIDEO | |||
| INPUT] to the appropriate signal in the |
|
| (STANDARD SET) |
| menu. (p. 84) |
|
|
|
|
|
|
cSet [VIDEO INPUT] to the appropriate signal in the (STANDARD SET) menu. (p. 84)
cSet [DISPLAY] to [LCD PANEL] in the (STANDARD SET) menu. (p. 86)
Cannot dub correctly using the A/V | cSet [VIDEO INPUT] to the appropriate signal in the |
|
| (STANDARD |
connecting cable. | SET) menu. (p. 84) |
|
|
|
|
|
cSet [DISPLAY] to [LCD PANEL] in the (STANDARD SET) menu. (p. 86)
•The A/V connecting cable is not connected properly.
cMake sure that the A/V connecting cable is connected to the proper jack, i.e. to the output jack of a device you are dubbing a picture from, or to the input jack of another device for dubbing a picture from your camcorder.
Pictures from connected devices are | • The input signal is not PAL. (p. 93) | ||
not displayed correctly. |
|
|
|
|
|
|
|
New sound added to a recorded tape | cIn the |
| (STANDARD SET) menu, adjust [AUDIO MIX] from the |
|
|
|
|
is not heard. | [ST1] (original sound) side until the sound is heard appropriately. (p. 83) | ||
|
|
|
|
A title is not recorded/A cassette label | cUse a cassette with Cassette Memory. (p. 123) | ||
is not recorded. | cErase unnecessary titles when the Cassette Memory is full. (p. 80) | ||
| cSet the | ||
| • A title cannot be added to a blank section of the tape. | ||
|
|
|
|
|
|
| ,continued |
Troubleshooting
Troubleshooting 117