b Note
• If you do not use the battery pack for a long time, use up the battery pack completely before storing it. See page 128 about storage of the battery pack.
CHG (charge) lamp
After charging the battery
The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack.
To remove the battery pack
POWER
PUSH switch

To check the remaining battery – Battery

6 Slide the POWER switch up to OFF Info

(CHG).

The CHG (charge) lamp lights up and charging starts.

DISPLAY/BATT INFO

POWER switch

Getting

You can check the battery’s current charge level and its current remaining recording time both during charging or when the power is turned off.

1 Set the POWER switch to OFF (CHG).

2 Press OPEN and open the LCD panel.

3 Press DISPLAY/BATT INFO.

The battery information appears for about 7 seconds.

Keep the button pressed to view it for about 20 seconds.

 

 

BATTERY INFO

 

BATTERY CHARGE LEVEL

 

0%

50%

100%

 

REC TIME AVAILABLE

 

LCD SCREEN:

54 min

 

VIEWFINDER:

76 min

 

A Battery charge level: Displays

Battery pack

approximate remaining amount of

1 Set the POWER switch to OFF (CHG).

power left in the battery pack.

B Approximate possible recording time

2 Lift up the viewfinder.

using the LCD panel.

3 Slide the battery pack out in the direction

C Approximate possible recording time

of the arrow while pressing the PUSH

using the viewfinder.

button.

 

 

 

started

Getting started 15