3 Slide the POWER switch repeatedly until the
The selected recording folder is displayed.
Slide the POWER switch while pressing the green button.
4 Press and hold PHOTO lightly.
You will hear a light beeping sound when the focus and brightness settings are adjusted. Recording does not start at this point.
The indicator stops flashing.
The number of images that can be recorded.*
60min | 1600 FINE | 8 |
101
P-MENU
*The number of images that can be recorded varies depending on the image quality setting and the recording environment.
5 Press PHOTO fully.
A shutter sound is heard. When bars of
disappear, the image is recorded on the “Memory Stick Duo.”
To check the most recently recorded image – Review
Touch 
.
Touch 
to return to standby.
To delete the image, touch 
, then [YES]. To cancel deleting, touch [NO].
To turn the power off
Slide the POWER switch up to the OFF (CHG) position.
To record still images continuously – Burst
Select the 
(MEMORY SET) menu, [STILL SET], then [ 
BURST] (p. 69).
You can record images continuously in a time interval of about 0.5 to 0.08 seconds.
Indicators displayed during recording
60min | 1600 FINE |
101
P-MENU
ARecording folder
BImage size
1600 (1600 × 1200) or | (640 × 480) |
CQuality
([FINE]) or 
([STANDARD])
DPersonal Menu button (p. 61)
EReview button (p. 30)
zTip
•When you press PHOTO on your Remote Commander, the image displayed on the screen at that timing is recorded.
•The recording time, date, and the camera settings data are recorded automatically on the recording media without being displayed on the screen. You can view this information during playback by selecting [DATA CODE] in the menu setting
•The recording angle is wider than that of the
30Recording