Troubleshooting (continued)

New sound added to a recorded tape is not heard.

•Adjust [AUDIO MIX] from the [ST1/FRONT] (original sound) side until the sound is heard appropriately (p. 65).

Still pictures cannot be dubbed from a tape to a “Memory Stick Duo.”

•You cannot record or a distorted picture may be recorded if the tape has been used repeatedly for recording.

Movies cannot be dubbed from a tape to a “Memory Stick Duo.”

•You cannot record or a distorted picture may be recorded in the following situations:

–The tape has a blank section.

–The tape has been used repeatedly for recording.

–The input signal has been interrupted or cut.

You cannot input pictures.

•You cannot input pictures while [DISP OUTPUT] is set to [V-OUT/PANEL] (p. 57).

•You cannot input pictures if you press the DISP/BATT INFO button.

Connecting to a computer

The computer does not recognize your camcorder.

•Disconnect the cable from the computer and camcorder, then connect it again securely.

•Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the computer.

•Disconnect the cable from the computer and camcorder, restart the computer, then connect them again correctly.

An error message appears when you place the supplied CD-ROM in your computer.

•Set the computer display as follows:

–Windows: 800 × 600 dots or more, High Color (16 bits, 65 000 colors or more)

–Macintosh: 1 024 × 768 dots or more, 32 000 colors or more

You cannot view the pictures the camcorder is seeing on the computer.

•Slide the POWER switch down to turn on the CAMERA-TAPE lamp on your camcorder, and set [USB-CAMERA] to [USB STREAM] (p. 55). (Only when connecting to the Windows computer with a USB cable)

•Disconnect the cable from the computer, turn on the camcorder, then connect it again.

94