STANDARD SET menu (continued)
DISP GUIDESee page 15.
GUIDEFRAMEYou can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISP/BATT INFO to make the frame disappear.
DATA CODEDisplays information recorded automatically (data code) during recording.
OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
This cannot be selected during Easy Handycam operation.
60min 0:00:00:00 1
2
6 | AUTO |
| 3 | |
100 AWB |
|
| ||
|
| |||
5 | F1. 8 9dB | 4 |
•appears for a picture recorded using a flash.
•In the DATE/TIME data display, the date and time are displayed in the same area. If you record a picture without setting the clock,
AUTO
Displays the remaining tape indicator for about 8 seconds in situations such as those described below.
•When you set the POWER switch to PLAY/ EDIT or
• When you touch | (Play/Pause). |
ON
Always displays the remaining tape indicator.
REMOTE CTRL (Remote control)The default setting is [ON], allowing you to use the Remote Commander (p. 32).
•Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit.
•The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes.
SteadyShot off* Exposure*
White balance* Gain*
Shutter speed Aperture value
* Appears only during tape playback.
•Camera setting data does not appear when movies on a “Memory Stick Duo” are played back.
•The exposure adjustment value (0EV), a shutter speed, and the aperture value appear when still images on a “Memory Stick Duo” are played back.
The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].)
BEEPON
A melody sounds when you start/stop recording, or operate the touch panel.
OFF
Cancels the melody.
56