Canon MP360, MP370 manual z Power supply, 220-240V AC, 50/60 Hz

•Do not install the machine in a location that is very humid or dusty, in direct sunlight, outdoors, or close to a heating source. Installing in such a location may result in fire or electrical shock. To avoid the risk of fire or electrical shocks, install the machine in a location with an ambient temperature range of 15°C to 27.5°C (59°F to 81.5°F) and humidity of 20% to 80% (condensation free).

•Do not place the machine on a thick rug or carpet. If fibers or dust come inside the machine, it could cause a fire.

zPower supply

•Never remove the plug by pulling on the cord. Pulling on the power cord may damage the cord and cause a fire or electrical shock.

•When turning OFF the power, be sure to press [ON/OFF] or unplug the machine. However, if the machine is unplugged during printing, the print head is not protected with the cap that prevents the ink from drying. This may affect the print quality of the machine when printing later.

•During electrical storms, turn OFF the power and disconnect the power cord from the power outlet.

•Do not use an extension cord as this may result in fire or electrical shock.

•Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the power cord if necessary. Otherwise you will be unable to disconnect the power plug in case of an emergency, and it may result in fire or electrical shock.

•Never use a power supply source other than the one rated for the machine in the country where you purchased the machine as it may result in fire or electrical shock. The operating requirement of this machine is as follows:

220-240V AC, 50/60 Hz

•Do not plug the machine into the same circuit as appliances such as an air conditioner, television, or copier. These devices generate electrical noise which may interfere with your machine’s operation.

•Whenever you turn OFF the power and unplug the machine, wait at least five seconds before you plug it in again.

IV