Canon MP370, MP360 Close the inner cover, Return the scan unit to its original position, Press

8Close the inner cover.

CAUTION

• Press the centre of the inner cover until the cover locks into place.

9Return the scan unit to its original position.

•The LCD displays a message asking if you replaced an ink tank.

INK TANK CHANGED?

- YES NO +

10 Press [ ].

• The LCD displays a message asking if you replaced the black ink tank.

BLACK INK CHANGED?
- YES	NO +

l

11 If you replaced the black ink tank, press [ ]. If you did not, press [ ].

• The LCD displays a message asking if you replaced the colour ink tank.

colour	INK CHANGED?
- YES	NO +

12 If you replaced the colour ink tank, press [ ]. If you did not, press [ ].

• The ink counter is now reset, and replacement of the ink tanks is completed.

NOTE

• To check the ink level of the ink tanks at any time, see page 103.

• Pressing [ ] does not reset the ink counter. Be sure to press [ ] if you replaced the ink tank.

• If you pressed [ ] by mistake, follow the procedure to reset the ink counter. (See page 102.)

Chapter 10 Maintenance 101