
5Press [OK/Set].
•The LCD displays a message asking if you replaced the black ink tank.
BLACK INK CHANGED?
- YES | NO + |
NOTE
• Do not press any keys other than [ ] or [ ].
6
7
If you replaced the black ink tank, press [ ]. If you did not, press [ ].
• The LCD displays a message asking if you replaced the colour ink tank.
colour | INK CHANGED? |
- YES | NO + |
If you replaced the colour ink tank, press [ ]. If you did not, press [ ].
• The ink counter is now reset.
NOTE
• Press [Stop/Reset] to switch the machine to standby mode.
Checking the ink level
If you reset the ink counter when you installed/replaced the ink tanks, you can check the current ink level of the ink tanks at any time.
To check the current ink level of the ink tanks, press [COPY], [SCAN], or [PHOTO]. The LCD will display the ink level for approx. three seconds.
Ex: | COPY MODE |
COL | BLK |
Indicates the remaining ink volume at three levels.
?Indicates the ink counter was not reset after replacing the ink tanks.
NOTE
• The LCD will not display the ink level when <LOW INK WARNING> is set to <OFF>.
Chapter 10 | Maintenance | 103 |