Cannot print. Check the printer.

•Switch off the printer and switch it on again, then disconnect the USB cable and reconnect it.

Flash

Charging… Cannot record still images.

•You are trying to record a still image while charging the flash (optional).

Lens cover

Lens cover not fully open. Turn power off then on (p. 22).

Lens cover is not closed. Turn the power off once (p. 13).

Others

Cannot record due to copyright protection (p. 105).

Cannot add audio. Disconnect the i.LINK cable (p. 64).

Not recorded in SP mode. Cannot add audio (p. 64).

Not recorded in 12-bit audio. Cannot add audio (p. 64).

Cannot add audio on the blank portion of a tape (p. 64).

Cannot add audio (p. 65).

•You cannot add sound to the tape recorded with 4CH MIC REC.

Cannot use 4CH MIC REC (p. 54).

•Disconnect the external 4CH microphone (optional) once, then connect it again.

Dirty video head. Use a cleaning cassette (p. 111).

Cannot start Easy Handycam Cannot cancel Easy Handycam (p. 20).

USB is invalid in this mode during Easy Handycam

•You can select [STD-USB] when you set the POWER switch to PLAY/EDIT during Easy Handycam operation, but you cannot select [PictBridge] or [USB STREAM]. (The message disappears

when you touch .)

HDV recorded tape. Cannot playback.

•Your camcorder cannot play back this format. Play back the tape with the equipment that recorded it.

HDV recorded tape. Cannot add audio.

•Your camcorder does not allow you to add audio on a section of a tape recorded in HDV format.

Troubleshooting

103