Remove the insulation sheet before using the Remote Commander.
Insulation sheet
6
17 q;
28 3
4
59
PHOTO (p. 22)
The
SEARCH M. (p. 31)
Video control buttons (Rewind, Playback,
ZERO SET MEMORY Transmitter
REC START/STOP (p. 22) Power zoom (p. 24)
DISPLAY (p. 15)
Memory control buttons (Index,
•Aim the Remote Commander towards the remote sensor to operate your camcorder (p.
32 26).
• To change the battery, see page 113.
Searching quickly for a desired scene (Zero set memory)
1During playback, press ZERO SET MEMORY at a point you want to locate later on.
The tape counter is reset to “0:00:00” and appears on the screen.
60min | 0:00:00 |
If the tape counter is not displayed, press DISPLAY .
2Press STOP when you want to stop playback.
3Press REW .
The tape stops automatically when the tape counter reaches “0:00:00.”
4Press PLAY .
Playback starts from the point designated “0:00:00” on the tape counter.
•There may be a discrepancy of several seconds between the time code and the tape counter.
•Zero set memory will not function correctly if there is a blank section between recorded sections on the tape.
To cancel the operation
Press ZERO SET MEMORY again.