Sony DCR-IP5/IP7BT manual 41

Playing back a tape

To display the screen indicators – Display function

Press DISPLAY on your camcorder or on the Remote Commander. The indicators being displayed disappear from the screen. To display the indicators, press DISPLAY again.

DISPLAY

Basics – Playback

Using the data code function

Your camcorder automatically records not only images on the tape but also the recording data (date/time and various settings when recorded) (Data code). Follow the steps below to display the data code using the camcorder or the Remote Commander.

When using the camcorder

To display the data code

(1) In playback or playback pause mode, select FN, then press the center z on the control button. The PAGE1 screen appears.

(2) Select PAGE3, then press the center z on the control button. The PAGE3 screen appears.

(3) Select DATA CODE, then press the center z on the control button. The DATA CODE screen appears.

DATACODE

OFFOK

CAM DATE

DATA DATA

(4) Select CAM DATA or DATE DATA, then press the center z on the control button. The top of the selected button is indicated with a green bar.

(5) Select OK, then press the center z on the control button.

(6) Select EXIT, then press the center z on the control button.

41