Recording a program
When using the A/V connecting cable
You can record or edit a program from another VCR that has video/audio outputs. Use your camcorder as a recorder.
1Switching the video input jack of the A/V connecting cable
The supplied A/V connecting cable is equipped with an S video plug and a video plug. You have to select one of the jacks in the menu settings. The default setting is VIDEO. If the setup is not necessary, go to “2Making a recording” on page 85.
(1) Set the POWER switch to VCR.
(2) Select FN, then press the center z on the control button. The PAGE1 screen appears.
(3) Select MENU, then press the center z on the control button. The menu appears.
(4) Select VIDEOINPUT via 
, then press the center z or B on the control button.
(5) Select VIDEO or S VIDEO, then press the center z on the control button.
(6) Press DISPLAY to turn off the menu. Pressing DISPLAY again displays the video control buttons.
2 | FN |
| 6 |
|
|
|
| ||
3 | MENU |
| 1 | POWER |
|
|
| CAMERA |
|
|
|
| MEMORY/ | (CHG) |
|
|
| NETWORK | OFF |
|
|
| VCR | ON |
4,5 |
|
| MODE | |
|
|
| ||
VCR SET | VCR SET |
|
| |
VIDEOINPUT VIDEO | VIDEOINPUT | VIDEO |
| |
| RETURN | RETURN | S VIDEO |
|
84