Playing back images in a continuous loop – SLIDE SHOW
To stop the slide show
Select | END, then press the center z on the control button. |
To pause during a slide show
Select PAUSE, then press the center z on the control button.
To return to the FN screen
Select END, then press the center z on the control button. The PAGE1 screen appears. Next, select EXIT, then press the center z on the control button.
To start the slide show from a particular image
Select the desired image by selecting
To view the recorded images on the TV screen
Connect your camcorder to a TV with the A/V connecting cable supplied with your camcorder before operation.
If you change the “Memory Stick” during operation
The slide show does not operate. If you change the “Memory Stick,” carry out the procedure again from the beginning.
To play the slide show with the screen indicators turned off
After step 5, press DISPLAY to turn off the screen indicators. You can start/pause the slide show using MEMORY PLAY on the Remote Commander. To end the slide show,
press DISPLAY again, next, select END, then press the center z on the control button.
When there are no images on the “Memory Stick”
The message “ NO FILE” appears.
148