Using the wide mode

To return to the FN screen

Select RETURN, , then press the center z on the control button. The PAGE1 screen appears. Next, select EXIT, then press the center z on the control button.

In wide mode, you cannot select the following functions:

–Old movie

–Bounce

During recording

You cannot select or cancel the wide mode. When you cancel the wide mode, set your camcorder to the standby mode and then set 16:9WIDE to OFF in the menu settings.

Connection for a TV

Pictures recorded in 16:9WIDE mode automatically appear on the TV screen at full size when:

–You connect your camcorder to a TV that is compatible with the video ID (ID-1/ID-2) system.

–You connect your camcorder to the S video jack on the TV.

ID-1 system

The ID-1 system sends aspect ratio information (16:9, 4:3, or letter box) with video signals. If you connect a TV compatible with the ID-1 system, the screen size is automatically selected.

ID-2 system

The ID-2 system sends a copyright protection signal with ID-1 signals inserted between video signals when you connect your camcorder to other equipment using the A/V connecting cable.

50