Checking the recording – END SEARCH

You can go to the end of the last recorded point.

(1) In standby mode, select FN, then press the center z on the control button. The PAGE1 screen appears.

(2) Select PAGE2, then press the center z on the control button. The PAGE2 screen appears.

(3) Select END SCH, then press the center z on the control button.

The last 5 seconds of the recorded section are played back and your camcorder returns to the standby mode. You can monitor the sound from the speaker.

1

2

3

FN

PAGE2

ENDSCH

To return to the FN screen

Select EXIT, then press the center z on the control button.

To stop searching

Select END SCH, then press the center z on the control button again.

Even if you remove the cassette

The end search function works.

38