Aiwa NSX-A909 manual Loading Discs, To Dlav one disc only. press DISC DIRECT PLAY, English

DISC CHANGE

DISC DIRECT PLAYI1 1-3

II 11 11 1 I Bl 1

To Dlav one disc only. press DISC DIRECT PLAY 1-3.

The selected disc is played once.

To play with the remote control

‘;%:;,,!,Press$!!DISC DIRECT PLAY, then press numbered buttons 1-3 within 3 seconds to select a disc.

To stop play, press W.

To pause play, press II. To resume play, press again.

To search for a particular point during playback, keep +

or - pressed and release it at the desired point.

To skip to the beginning of a track during playback, press

- or * repeatedly or turn MULTI JOG. To remove discs, press 4 OPEN/CLOSE.

To start play when the power is off (Direct Play Function)

—’:.4	Press CD. The power is turned on and play of the loaded disc(s)
	begins.
	When 4 OPEN/CLOSE is pressed, the power is also turned on
	and the disc compartment is opened.

LOADING DISCS

Press CD, then press 4 OPEN/CLOSE to open the

disc compartment. Load disc(s) with the label side up.

To dav one or two discs, place the discs on tray 1 and 2.

To Wav three discs, press DISC CHANGE to rotate the trays after placing two discs. Place the third disc on tray 3.

Close the disc compatlment by pressing A OPEN/CLOSE.

CHANGE

Tray 1

Tray	number of the
disc	to be played	Total playing time

Total number of tracks

Load discs,

To olav all discs in the disc com~artment, press +-.

Play begins with the disc on tray 1.

Number of track being played Elapsed playing time

To check the remaining time

During play, press CD EDIT/CHECK. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above.

Selecting a track with the remote control

1 Press DISC DIRECT PLAY, then press numbered buttons 1-3 within 3 seconds to select a disc,

2Press numbered buttons O-9 and +1 O to select a track. Example:

To select the 25th track, press +1 O, +1 O and 5. To select the 10th track, press +10 and O.

The selected track starts to play and continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.

1 Press DISC CHANGE.

2Remove the discs and replace with other discs.

3Press 4 OPEN/CLOSE to close the disc compartment.

m

cWhen loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.

●Do not place more than one compact disc on one disc tray.

●Do not”tilt the unit with discs loaded. Doing so may cause malfunctions.

●Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions.

15 ENGLISH