Aiwa NSX-A909 manual Press TAPE, Press DOLBY NR to turn off the Dolby NR, To stop dubbing, English

EEH

. !~et th,? tape to the point where recordin9 will start

●The reverse mode is automatically set to =.

Note that recording will be done on one side of the tape only.

Press TAPE.

Insert the original tape into deck 1 and the tape to be recorded on into deck 2.

Insert the tapes with the sides to be played back or recorded

on facing out from the unit.

Press DOLBY NR to turn off the Dolby NR.

00 NR on the display goes out.

Pre!ss TAPE DECK 1/2 to select deck 1.

“TP 1“is displayed.

5 Press O REC/REC MUTE to start recording.

Playing and recording start simultaneously.

To atop dubbing

Press Ml.

To set the Dolby NR when playing back the dubbed tape

Press [)OLBY Ni3 and turn Dolby NR on or off to match the

original tape.

This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start

simultaneously as soon as the longer tape has been reversed.

m

● Dubbing does not start from a point halfway in the tape. ● The reverse mode is automatically set to 11.

● The Dolby NR does not affect recording.

1 Press TAPE.

2 Insert the original tape into deck 1 and the tape ❑ to be recorded on into deck 2.

Insert each tape with the side to be played back or recorded

on facing out from the unit.

3 Press SYNC DUB once or twice to start recording.

(0 For recording at normal speed, press it once to display

NORM-DUB.

@For recording at high speed, press it twice to display

HIGH-DUB. -

0

The tapes are rewound to the beginning of the front sides, and recording starts.

To stop dubbing

Press ■ .

To set the Dolby NR when playing back the dubbed tape

Press DOLBY NR and turn Dolby NR on or off to match the original tape.

Recording does not start, if the erasure prevention tab on either side of the tape is broken off.

ENGLISH 18