Aiwa NSX-A909 manual MfN3, Press TUNER/BAND repeatedly to select the desired band, I English

— ,Mf)N(3.-----

TUNER

0-9,+1 o

TUNER/

BAND

I__	._	..,, .——,
	!	4	e

1 Press TUNER/BAND repeatedly to select the desired band.

~FM—AM—l

When TUNEFUBAND is pressed while the power is off, the power is turned on directly.

To search for a station quickly (Auto Search)

Keep + DOWN or * UP pressed until the frequency starts to change rapidly. After tuning in to a station, the search stops.

To stop the Auto Search manually, press < DOWN or _

UP.

●The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press MONO TUNER on the remote control so that “MONO appears on the display,

Noise is reduced, although reception is monaural.

To restore stereo reception, press MONO so that “MONO” disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHzLstep. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing TUNER/BAND. To reset the interval, repeat this procedure.

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

2 Press 4+ DOWN or - UP to select a station.

Each time the button is pressed, the frequency changes.

When a station is received, “TUNE is displayed for 2 seconds.

During FM stereo reception, (l(m))] is displayed.

,.

1 I ENGLISH