Aiwa NSX-A909 Eexei, Repeat for the rest of the tracks for side A, program the tracks for side B

DISC DIRECT PLAY

-0-9,+1 o

6 Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time

7 Press CD EDIT/CHECK to select side B and

program the tracks for side B.

After confirming “B”on the display, repeat step 5.

Tape side !3 (reverse side)

I

@

,,;~’”

@

,g’y

“g’{

-----	.- .-. _‘f	( -J,
	~iu

3‘“”EW.7 , :- L---lT---=”ll8Press the O FIEC/REC MUTE button to start recording,

Irr the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of ths tape as the tracks are programmed.

EEXEI

The prqrammed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side,

7 Insert the tape into deck 2, and press DOLBY NR

tc~turn Dolby NR on or off.

Insert the tape with the side to be recorded on first facing out

from the unit.

2 Press CD and load the disc(s).

3 Press CD EDIT/CHECK twice.

“EDl”~ and “PRGM” are displayed.

. when “AI” is displayed, press CD EDIT/CHECK again.

4 Press numbered buttons on the remote control

tc} designate the tape length.

10to 99 minutes can be specified.

●The +, W or MULTI JOG are also available to designate the tape Iengtll,

Tape length Tape side A (front side)

Maximum recording time for side A

5 Press DISC DIRECT PLAY 1-3 to select a disc.

TIhelri, press numbered buttons O-9 and + II O on

the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC

DIIRECT PLAY 2, then press +10 and O.

Remaining time Programmed

on side A tracks

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.

To stop recording

Press ■ . Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press CD EDIT/CHECK to select side A or B,

and press + or - repeatedly.

Disc number Tape side Program number

Track number	Programmed track
	numbers

To change the program of each side

Press CD EDIT/CHECK to select side A or B, and press ■ CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice so that “EDIT” disappears on the display.

m

Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

ENGL/SH 20