Krell Industries DVD Player manual Remote Control Description, Battery Installation and Removal

Remote Control Description

See Figure 2 on page 8

Battery Installation and Removal

Notes

The Showcase DVD remote control uses one CR2025 lithium bat- tery, which is included with the shipment.

To open the battery compartment on the back of the remote control:

1.Place the remote face down on the table.

2.Use your thumbnail or a small jeweler’s or eyeglass screwdriver to move the small tab toward the center of the remote, while using your index fingernail or screwdriver to pull down gently on the slot to the right of the tab. The battery compartment will slide out.

3.Place the battery, positive (+) side up, in the battery tray.

4.Slide battery compartment back into the remote until you hear a click.

The remote control is ready for operation.

Do not use a knife or other sharp object to open the battery compartment; they will scratch the remote control finish.

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not used for a long time. Battery leakage can damage the remote control.

Remote

Control-Only

Functions

ADVANCED DISC FUNCTIONS

The Showcase DVD remote control provides all the power, standard disc functions, menu access, and menu setup functions available on the front panel. Additional advanced disc and programming functions are accessed only from the remote control. A description of the remote control-only keys for the Showcase DVD follows.

20Audio Key

Press this key to access the audio icon on the multiple-toolbar menu. Use the down directional button or key (14) to cycle between OFF or the languages available on the disc soundtrack. The last language scrolled to is automatically selected, and becomes active after the transport (12) is opened and closed. Navigate to the audio sound category of the OSD menu for an expanded view of the languages available.

12 Krell Showcase DVD