Krell Industries DVD Player manual Placement, AC Power Guidelines

Placement

Note

IMPORTANT

AC Power Guidelines

Before you install the Showcase DVD into your system, review the following guidelines to choose the location for the component. This will facilitate a clean, trouble-free installation. The Showcase DVD does not require any type of special rack or cabinet for installation.

Place the Showcase DVD on a firm, level surface, away from exces- sive heat, humidity, or moisture. The Showcase DVD requires at least one inch (2.5 cm) of clearance on each side and at least one inch (2.5 cm) of clearance above and below the component to pro- vide adequate ventilation. Installations inside cabinetry may need extra ventilation.

The Showcase DVD incorporates an advanced suspension system and does not require additional mass coupling or isolation. You may experiment with feet or cones as long as they are not permanently affixed to the unit. Any unauthorized modifications to the unit or electronics will void the war- ranty.

Do not attach enhancement accessories such as rings, mats, or dampers to individual discs. These accessories may interfere with the disc transport, resulting in erratic playback and/or poor performance.

The Showcase DVD has superb regulation and does not require a dedicated AC circuit. Operate the Showcase DVD only with the power cord supplied.

Avoid connections through extension cords or multiple AC adapters. High quality 15 amp grounded AC strips are acceptable. High quality AC line conditioners or filters may be used if they are grounded and meet or exceed the unit’s power supply rating of 100 VA.

Krell Showcase DVD 5