Krell Industries DVD Player manual Back Panel Remote Connections, Digital Audio Outputs

Back Panel Description, continued

Digital Audio Outputs

Back Panel

Remote

Connections

33Optics Digital Output

The Showcase DVD is equipped with one EIAJ optics digital audio output via a TosLink connector.

34Coaxial Digital Output

The Showcase DVD is equipped with one S/PDIF coaxial digital audio output via an RCA connector.

35RS-232 Communication Port

The Showcase DVD is equipped with an RS-232 communication port, which receives messages from a computer-based control system, providing more intelligent control of the Showcase DVD. For more information, see RS-232 Port: Sending Commands and Interpreting Data, the developer’s reference on the Krell website at www.krellonline.com.

3612 VDC Out and In

	The 12 VDC out and in connections allows you to control the
	operational and stand-by modes of components with 12 V trig-
	gers, to easily coordinate allowing whole systems or parts of sys-
	tems.
	Output. The 12 VDC output sends a 12 Volt power on/off signal
	to other Krell components via a 12 V cable, as well as to other
	devices that incorporate a 12 V power on/off trigger input.
	Input. The 12 VDC input receives 12 Volt power on/off signals
	from other Krell components and devices that incorporate a 12 V
	trigger.
Notes	When the Showcase DVD is in the operational mode, 12 VDC output
	provides 12 V of DC output. When the Showcase DVD is in the stand-by
	mode or off, DC output is 0 V.
	12 VDC Out (12 V trigger) current is limited to 30 mA.
	Consult the owner’s manual of each component used in a custom installa-
	tion to take full advantage of the Showcase DVD’s remote capability.
	37 IR Select Switch
	Use this switch to activate the front or Back Infrared Sensor (38).
	Front. The switch in the up position indicates that the front
	infrared sensor is active.
	Rear. The switch in the down position indicates that the back
	infrared sensor is active.

16 Krell Showcase DVD