Checking the recording

– END SEARCH / EDITSEARCH / Rec Review

You can use these buttons to check the recorded picture or shoot so that the transition between the last recorded scene and the next scene you record is smooth.

EDITSEARCH

END SEARCH

Basics – Recording

END SEARCH

You can go to the end of the recorded section after you record.

Press END SEARCH in the standby mode.

The last 5 seconds of the recorded section are played back and playback stops. You can monitor the sound from the speaker or headphones.

EDITSEARCH

You can search for the next recording start point.

Hold down the +/– (Œ) side of EDITSEARCH in the standby mode. The recorded section is played back.

+: to go forward

– : to go backward

Release EDITSEARCH to stop playback. If you press START/STOP, re-recording begins from the point you released EDITSEARCH. You cannot monitor the sound.

Rec Review

You can check the last recorded section.

 

Press the – (Œ) side of EDITSEARCH momentarily in the standby mode.

 

The last few seconds of the recorded section are played back. You can monitor the

 

sound from the speaker or headphones.

 

Notes

 

•END SEARCH, EDITSEARCH and Rec Review work only for tapes recorded in the

 

Digital8 system.

 

•If you start recording after using the end search function, occasionally, the transition

 

between the last scene you recorded and the next scene may not be smooth.

 

•The end search function may not work when there is a blank portion between pictures

 

on a tape.

 

Once you eject the cassette after you have recorded on the tape

 

The end search function does not work.

21