Viewing a still picture – Memory photo playback

Viewing the recorded images using a personal computer

You can view the still pictures which are recorded in the built-in flash memory on the PC screen.

Set the POWER switch to VTR, or set the POWER switch to CAMERA and set STANDBY to MEMORY. Connect your camcorder to your PC using the PC serial cable supplied with your camcorder. The PC MODE indicator appears in the viewfinder or on the LCD screen.

For details on the connection and operation refer to the operating instruction supplied with PictureGear 3.2Lite (supplied with your camcorder).

DIGITAL

Serial port

 

I/O

 

: Signal flow

PC serial cable (supplied)

To finish PC mode

Remove the PC serial cable from the DIGITAL I/O jack

Examples of recommended OS/application software

OS

•Windows95 or 98 •WindowsNT4.0

Application

•Microsoft Internet Explorer, etc.

Notes

•When you view images recorded with the camcorder on a personal computer, the display may show lines on the edge of the screen, depending on the current state of video input signals. This is not a malfunction.

•You cannot access your PC:

while the tape is being played back.

during the slide show.

while copying still images.

while the cassette compartment is opened.

68