Copying images recorded in the built-in flash memory to tapes

You can copy still images recorded in the built-in flash memory and record them to a tape.

Before operation

Insert a tape for recording.

(1) Set the POWER switch to VTR.

(2) Using the tape transport buttons, search a point where you want to record the desired still image. Set the tape to the playback pause mode.

(3) Press rREC to set the tape to the recording pause mode.

(4) Press PLAY to play back the still image you want to copy.

(5) Press Pto start recording and press Pagain to stop.

(6) If you have more to copy, repeat steps 4 and 5.

2

 

 

3 REC

4 PLAY

1 POWERCAMERA

5 PAUSE

 

OFF

VTR

To stop copying midway

Press p.

During copying

You cannot operate the following buttons:

MEMORY PLAY, MEMORY INDEX, MEMORY DELETE, MEMORY +, and MEMORY –.

74