
Playing back a tape
Various playback modesTo operate control buttons, set the POWER switch to VTR.
To view a still picture (playback pause)Press Pduring playback. To resume playback, press Por (.
To advance the tapePress )in the stop mode. To resume normal playback, press (.
To rewind the tapePress 0in the stop mode. To resume normal playback, press (.
To change the playback directionPress <on the Remote Commander during playback to reverse the playback direction. To resume normal playback, press (.
To locate a scene monitoring the picture (picture search)Keep pressing 0or )during playback. To resume normal playback, release the button.
To monitor the
Keep pressing 0while rewinding or )while advancing the tape. To resume rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)Press .on the Remote Commander during playback. For slow playback in the reverse direction, press <, then press .on the Remote Commander. To resume normal playback, press (.
To view the picture at double speedPress ×2 on the Remote Commander during playback. For double speed playback in the reverse direction, press <, then press x2 on the Remote Commander. To resume normal playback, press (.
To view the picturePress 7on the Remote Commander in the playback pause mode. For
Press END SEARCH in the stop mode. The last 5 seconds of the recorded section plays back and stops.
In the various playback modes•Noise may appear when your camcorder plays back tapes recorded in the Hi8/ standard 8 system.
•Sound is muted.
•The previous recording may appear as a mosaic image when playing back in the Digital8 system.
•Your camcorder automatically enters the stop mode. To resume playback, press (. •The previous recording may appear.
| Slow playback for tapes recorded in the Digital8 system |
| The slow playback can be performed smoothly; however, this function does not work |
24 | for an output signal from the DV IN/OUT jack. |
|