Sony DCR-TRV510 Quickly locating a scene using the zero set memory function, (1), (2), (3), (4), (5), Notes, DISPLAY, ZERO SET MEMORY

Quickly locating a scene using the zero set memory function

Your camcorder goes forward or backward to automatically stop at a desired scene having a tape counter value of “0:00:00”. Use the Remote Commander for this operation.

Use this function, for example, to view a desired scene later on during playback.

(1) In the playback mode, press DISPLAY.

(2) Press ZERO SET MEMORY at the point you want to locate later. The tape counter shows “0:00:00” and the ZERO SET MEMORY indicator flashes.

(3) Press pwhen you want to stop playback.

(4) Press 0to rewind the tape to the tape counter’s zero point. The tape stops automatically when the tape counter reaches approximately zero. The ZERO SET MEMORY indicator disappears and the time code appears.

(5) Press (. Playback starts from the tape counter’s zero point.

ZERO SET MEMORY

Notes

DISPLAY

•The zero set memory function works only for tapes recorded in the Digital8 system. •When you press ZERO SET MEMORY before rewinding the tape, the zero set memory

function will be canceled.

•There may be a discrepancy of several seconds from the time code.

•The zero set memory function may not work when there is a blank portion between pictures on a tape.

44