Sony DCR-TRV940E manual 297

Types of trouble and how to correct trouble

Symptom	Cause and/or Corrective Actions
The cassette cannot be removed	• Moisture has started to condense in your camcorder (p. 321).
even if the cassette lid is open.
The melody or beep sounds for	• Moisture condensation has occurred.
five seconds.	c Remove the cassette and leave your camcorder for at least
	one hour to acclimatise (p. 321).
	• Some troubles have occurred in your camcorder.
	c Remove the cassette and insert it again, then operate your
	camcorder.

When you set the POWER switch to • This is because some functions use a linear mechanism. Your

VCR or OFF (CHG), if you move	camcorder is not malfunctioning.
your camcorder, you may hear a
clattering sound from inside your
camcorder.
You cannot charge the battery pack.	• The POWER switch is not set to OFF (CHG).
	c Set it to OFF (CHG) (p. 25).
While charging the battery pack, no	• The battery pack is not properly installed.
indicator appears, the indicator	c Install it properly (p. 24).
flashes in the display window.	• Something is wrong with the battery pack.
	c Please contact your Sony dealer or local authorised Sony
	service facility.
No function works though the	• Disconnect the mains lead of the AC power adaptor or remove
power is on.	the battery, then reconnect it in about one minute. Turn the
	power on. If the functions still do not work, press the RESET
	button using a sharp-pointed object (If you press the RESET
	button, all the settings including the date and time return to
	their defaults.) (p. 24, 29, 335).
The buttons do not appear on the	• The DISPLAY/TOUCH PANEL button is pressed.
touch panel.	c Press the LCD screen lightly.
	c Press the DISPLAY/TOUCH PANEL button on your
	camcorder or the DISPLAY button on the Remote
	Commander (p. 54).
The buttons on the LCD screen do	• Adjust the screen (CALIBRATION) (p. 323).
not work.
The indicators appear mirror-	• The mirror mode is activated.
reversed in the viewfinder or on the	This is not a malfunction (p. 45).
TV screen.

устранение и Поиск / Troubleshooting

Image data cannot be transferred by the USB connection.

•The USB cable was connected before installation of the USB driver was completed.

c Uninstall the incorrect USB driver and re-install the USB driver (p. 243, 248, 260).

•USBCONNECT is set to PTP in the menu settings when the POWER switch is set to MEMORY/NETWORK (DCR- TRV950E only).

c Set it to NORMAL (p. 278).

неисправностей

297