Operating Instructions
Options | Descriptions |
| Audio | Dolby Digital: If you are using an external audio system or TV |
| that supports Dolby Digital® audio, select Auto On (The unit is |
| shipped with factory setting of Off.). If you are using an audio |
| system or TV that only receives PCM digital audio signals, |
| select Off. |
| ✍ Do not select the Auto On setting if connecting to a device that is |
| not capable of decoding Dolby Digital audio. Doing so may cause |
| the audio receiver to create unwanted noise that could potentially |
| cause harm to audio equipment. |
| Default Digital Audio: Select from one of the following: |
| English, Spanish, French and Native. The HD DVR will output |
| the associated audio track if it is available from the broadcast. |
| Current Digital Audio: Select the available audio tracks of the |
| current program, if any. |
| Default Analog Audio: Select from one of the following: |
| Stereo, SAP or Mono. When you view a program broadcast in |
| mono, you will hear only mono sound, even though Stereo |
| mode is set. When Second Audio Program "SAP" mode is set, |
| the programs second audio program is heard in mono, if |
| available. |
| Current Analog Audio: Select Stereo, SAP or Mono. |
| Selecting Stereo will provide stereo reception when a program |
| is broadcast in stereo. Select SAP to automatically switch to |
| Second Audio Program when a signal is received. If no SAP |
| signal is present, the audio remains in Stereo mode. Select |
| Mono to reduce noise during a weak stereo broadcast. |
40