Possible Remedies
Check the Recording History list to confirm that the recording had been scheduled or why it may not have been recorded.
If recording to a VCR, make sure the VCR is turned Off before the recording begins.
Make sure there is a tape in the VCR.
Check the placement of the
Check the Schedule menu and verify that the show is listed.
Check the Schedule menu and verify that the show is listed as a Reminder.
Highlight the show under Listings and do the following:
❏Press the MENU button on the remote control.
❏Use the down arrow to highlight Edit Reminder, and press SELECT.
❏Verify that the
❏The HD DVR must be on at the scheduled time for
Possible Remedies
The batteries could be weak. Replace the batteries. Check the orientation of the batteries.
Move the device switch to the DVR position. You may have inadvertently moved the device switch to the TV, DVD or AMP position, which changes the remote control mode.
Make sure the correct Remote Control Codes are set for both the remote control and for the HD DVR (see page 14).
Make sure the HD DVR’s power cord is connected securely to the wall outlet. Locate the HD DVR at least
If you are using the HD DVR remote to change channels, first move the device switch on the remote control to the DVR position.
Remote control does not If the remote control batteries have been replaced recently, the code numbers operate
There may be more than one code for the equipment that you are attempting to operate.
There is a possibility that some
80