Using the TV Guide On Screen™ System

Using the SETUP Service

You can customize the TV Guide On Screen system settings. If you have not completed the initial setup please do so now. This service is only available after you have completed the TV Guide On Screen system setup (see page 28).

To Do This...

Do This...

Change System

This option allows you to change or update the current settings of: zip or

Settings

postal code, cable or antenna setup and recording device.

 

1

Highlight SETUP in the Service Bar.

 

2

Scroll down and highlight the “Change system settings” then press SELECT.

 

3

Follow the on screen instructions.

Change Channel This option allows you to edit channel information that appears in

Display LISTINGS. The changes you can make are: re-order the position of channel, change the tune channel number, and switch a channel “On” to always be displayed, “Off” to never display or “Auto-Hide” to display only when program information is available.

1Once the “Change Channel Display” is highlighted in the SETUP service, press SELECT.

2Highlight a channel then press MENU to display Option menu.

3Make the changes using SELECT scroll bar and V/v buttons.

4Highlight “done” and press SELECT. Press SELECT again to exit the menu.

Change Default This option allows you to make changes in the following default settings:

Options “General defaults” allows you to set the Info Box size and Auto-Guide feature to turn “on” (default) or “off” when the HD DVR is powered on; “Record defaults” allows you to set recording start and end time (default setting is on time) and select recording device type (default is HD DVR); “Remind defaults” allows you to select whether to auto tune and adjust reminder time if using auto tune.

1Once one of your selections from “default” is highlighted in the SETUP service, press MENU to display the Option menu. Make the changes using SELECT scroll bar and V/v buttons.

2Highlight “done” and press SELECT. Press SELECT again to exit the menu.

69