36
VAIO Digital Studio System Reference Manual
9 Align the module over the appropriate socket, noting the location of pin 1 on the module and pin 1 on the socket.
Latch
Edge Connector
10 Carefully but firmly insert the edge of the module into the socket.
11 Press down firmly and evenly at both corners until the module is fully seated.
✍When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place.
12 Replace the AGP card and secure using the screw removed earlier.
✍Be sure to press down firmly until the handle on the AGP slot is straight up and locked into the slot on the AGP card.
13 Replace the power supply (see “Replacing the Power Supply” on page 45).
14 Replace the side cover (see “Replacing the Side Cover” on page 25).
15
Your computer automatically recognizes the extra memory and configures itself accordingly when you turn on the computer. No further action is required.
