Tips

Make sure that you connect the plug of the micro-USB cable in the direction as shown in the illustration below.

Charging starts when the headset and the computer are connected.

Make sure that the indicator (red) lights up. Charging is completed in about

4.5hours* and the indicator (red) goes off automatically.

* Time required to charge the empty battery to its full capacity

Note

If the headset is not used for a long time, the indicator (red) may not light up when you connect the micro-USB cable to charge the headset. In this case, do not disconnect the micro-USB cable from the headset and wait until the indicator (red) lights up.

Tips

If the micro-USB cable is connected to a computer while the headset is turned on, the headset will be turned off automatically.

To charge the headset from an AC outlet, use USB Charging AC Power Adaptor* (sold separately). For details, refer to the manuals supplied with the USB Charging AC Power Adaptor.

The headset cannot be turned on while charging the battery.

28

Page 28
Image 28
Sony DR-BTN200 manual Tips