Changing “Image Transfer” settings
You can change “Image Transfer” settings.
When “Image Transfer” starts, the window below appears.
When you select [Settings] from the above window, you can only change the [Basic] setting.
Copying images without using “Image Transfer”
— Windows 98/98SE/2000/Me
If “Image Transfer” is not set to launch automatically, you can copy images as following procedure.
aDouble-click [My Computer], then double-click [Removable Disk].
The contents of the “Memory Stick”
inserted in your camera appear.
•This section describes an example of copying images to the “My Documents” folder.
•When the “Removable Disk” icon is not shown, see the following column.
•When using Windows XP, see page 56.
b
The folder opens.
cDrag and drop the image files into the “My Documents” folder.
The image files are copied to the “My
Documents” folder.
•When you try to copy an image to a folder in which an image with the same file name is stored, the overwrite confirmation message appears. When you overwrite the existing image with the new one, the original file is deleted.
When the removable disk icon is not shown
1
The “System Properties” screen appears.
•When using Windows 2000, click [Hardware] on the “System Properties” screen.
2Confirm if other devices are already installed.
1Click [Device Manager].
2Confirm if there is a “ Sony DSC”
with a mark.
3If you find either of the devices above, follow the steps below to delete them.
1Click [ Sony DSC].
• When using Windows 2000,
[ Sony DSC]. | Enjoying | |
| ||
2Click [Remove] (or [Uninstall] in |
| |
Windows 2000). |
| |
The “Confirm Device Removal” | images | |
3Click [OK]. | ||
screen appears. |
| |
The device is deleted. | on | |
Try the USB driver installation again using | your | |
computer | ||
the supplied | ||
|
55