Symptom

Cause/Solution

 

You cannot insert the date or print

¥ Consult with the printer manufacturer whether the printer provides date function or index print

 

images in the index mode.

function or not.

 

 

 

¥ The date may not be inserted in the index mode depending on the printer. Consult with the printer

 

 

 

manufacturer.

 

The paper size you want to print on

¥ Check with the printer manufacturer whether the printer supports the paper size you want to print on.

 

does not appear.

 

 

“---- -- --

” is printed on the date-

¥ The images that do not have the recording date data cannot be printed with the date inserted. Set

 

inserted part.

[Date] to [Off] and print the image.

 

You cannot print with the current

¥ If the printer paper was changed to paper of a different size after the camera was connected to the

 

paper size setting of the printer.

printer, disconnect and connect the USB cable again.

 

 

 

¥ The printing setting of the camera differs from the printer setting. Change the paper size setting of

 

 

 

the camera (pages 92 and 94) or change the printer setting.

 

 

 

 

You cannot perform other operations

¥ The printer is performing the printing stop processing, so wait for this processing to Þnish. (This

 

when printing is stopped.

processing may take some time depending on the printer.)

 

Others

 

 

 

 

 

 

Symptom

Cause/Solution

 

Your camera does not work.

¥ You are not using an ÒInfoLITHIUMÓ battery pack. Use an ÒInfoLITHIUMÓ battery pack (page

 

 

 

146).

 

 

 

¥ The battery level is low. (The indicator appears.) Charge the battery pack (page 13).

 

 

 

¥ Connect the AC Adaptor securely to the DC IN jack of your camera and to a wall outlet (wall socket)

 

 

 

(page 16).

 

 

 

 

The power is on, but the camera does

¥ The built-in microcomputer is not working properly. Disconnect, and then, after one minute,

 

not work.

reconnect all power sources and turn on the camera. If this does not work, press the RESET button

 

 

 

inside the battery/ÒMemory StickÓ/CF card cover with a Þne-tipped object, then turn the power on

 

 

 

again. (This will clear the date and time settings, etc.) (page 119)

 

You cannot identify an indicator on

¥ Check the indicator (pages 149 to 153).

 

the screen.

 

 

The lens gets fogged.

¥ Moisture condensation has occurred. Turn off the camera and leave for about an hour at room

 

 

 

temperature for the moisture to evaporate before use (page 143).

 

The camera becomes warm when you

¥ This is not a malfunction.

 

use it for the long time.

 

128

The lens does not move when you

¥ The battery pack is discharged. Replace the battery pack with a charged battery pack (page 13) or

turn off the camera.

use the AC Adaptor (page 16).