Sony DSC-V3 Direct printing, Preparing the camera, Set the mode dial to SET UP, Set the mode dial to SET UP, Select [PictBridge] with /, then press 

Direct printing

Even if you do not have a computer, you can easily print images shot using your camera by connecting the camera to a PictBridge compliant printer. For preparation, you only set the USB connection in the SET UP settings and connect the camera to the printer with the USB cable.

Using a PictBridge compliant printer easily prints the index print*.

Single print

Index print

Preparing the camera

Set the USB mode on the camera to connect the camera with a printer.

Mode dial

Control button

*An index print function may not be provided depending on a printer.

¥Using the AC Adaptor is recommended to prevent the power from turning off partway through printing.

¥You cannot print movies and images recorded in RAW mode.

¥When printing uncompressed (TIFF) images, only their corresponding JPEG files are printed.

¥When an error notiÞcation is received from the connected printer, theindicator ßashes for approximately Þve seconds. Check the connected printer.

¥Note that printing may be canceled if you

switch the/CF switch while printing images.

¥If you arrange the same image side by side, select [This image] in single-image mode, then set [Index] to [On] (page 92).

¥The number of images printed on a single index print differs according to the printer.

Set the mode dial to SET UP.

Select 2 (Setup 2) with , then select [USB Connect] with //.Select [PictBridge] with /, then press .

Setup 2

1 File Number: PictBridge

2USB Connect: PTP

	Video Out:	Normal
	Clock Set:
1
2

The USB mode is set.

90