First shot (Adjusted in the + direction)

Second shot

(Proper exposure set by the camera)

Third shot (Adjusted in the – direction)

Set the mode dial to P, S, A, M or SCN.

Press MENU.

The menu appears.

Select [Mode] (REC Mode) with /, then [Exp Brktg] with

/.

Select [BRK] (Bracket Step) with /, then select thedesired bracket step value

/.

±1.0EV: Shifts the exposure value by plus or minus 1.0EV.

±0.7EV: Shifts the exposure value by plus or minus 0.7EV.

±0.3EV: Shifts the exposure value by plus or minus 0.3EV.

Shoot the image.To return to normal mode

Select [Normal] in step .

•You may not be able to use the Exposure Bracket mode depending on the Scene Selection mode (page 41).

•You cannot use the ßash in this mode.

•The focus and white balance are adjusted for the Þrst image, and these settings are also used for the other images.

•When the exposure is manually adjusted (page 61), the exposure is shifted based on the adjusted brightness.

•The recording interval is approximately 0.3 second.

•If the subject is too bright or too dark, you may be unable to shoot properly with the selected

bracket step value.

¥You cannot select certain shutter speeds*.

*When [ISO] is [800]:

Shutter speeds of 1/25 second or slower When [ISO] is other than [800]: Shutter speeds of 1/6 second or slower

Selecting the ISO sensitivity— ISO

You can change the cameraÕs sensitivity to light. When you select a high-number setting, you can shoot in a dark place.

Normally, the ISO sensitivity is set to [Auto]. When set to [Auto], the ISO sensitivity is automatically increased in a dark place.

MENU

Mode dial

Control button

Set the mode dial to P, S, A or M.

Press MENU.

The menu appears.

shooting image still Advanced

65