Sony DSCT300B, DSCT300R charge, Status, Remaining, indicator, Battery pack, the access lamp, “Memory Stick Duo”, Slide the battery eject lever, full, soon, power, Battery, charged

[To check the remaining battery charge

Press POWER button to turn on and check the remaining battery charge on the LCD screen.

Remaining
charge
indicator
Status	Sufficient	Battery	Battery half	Battery low,	Change the battery
	power	almost fully	full	recording/	with fully charged
	remaining	charged		playback	one, or charge the
				will stop	battery. (The warning
				soon.	indicator flashes.)

•If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after the remaining charge indicator.

•It takes about one minute until the correct remaining charge indicator appears.

•The remaining charge indicator may not be correct under certain circumstances.

•The Clock Set screen appears when you turn on the camera for the first time (page 13).

[To remove the battery pack/“Memory Stick Duo”Open the battery/“Memory Stick Duo” cover.

“Memory Stick Duo”	Battery pack
Make sure that the access lamp is not lit,	Slide the battery eject lever.
then push the “Memory Stick Duo” in once.	Be sure not to drop the battery pack.

•Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”/internal memory.

•Use the NP-BD1 battery pack (supplied) only with this camera.

12