1 Press the SCH button on the vectorscope.
The vectorscope switches to SCH mode.
2 Press the B channel button on the vectorscope.
This displays the black burst signal from the switcher.
3 Press the EXT button on the vectorscope.
This switches the vectorscope to external synchronization mode.
4 Adjust the phase synchronization control on the vectorscope so that the sync and subcarrier phases are close to the reference line.
Sync phase
Subcarrier phase | Reference line |
Align the sync and subcarrier phases of the black burst signal to the reference line.
5 Output the player 1 signal.
6 Press the A channel button on the vectorscope.
This displays the sync and subcarrier phases (composite signals only) of the signal from player 1.
7 On player 1, adjust the SYNC PHASE and SC PHASE controls on the menu control panel, using a Phillips screwdriver, so that the output from player 1 on channel A is in correct phase alignment with the black burst signal on channel B.
Note
When component signals are used the subcarrier phase indicator does not appear.
8 Output the player 2 signal and repeat steps 6 and 7 to adjust the sync and subcarrier phases of the output from player 2.
Note
Note
The color of video on monitors connected to the composite and
Settings and Connections 5 Chapter
This indicator |
|
|
| This indicator |
|
|
| ||
moves as you |
| |||
| ||||
| moves as you | |||
turn the SYNC |
| |||
| turn the SC | |||
PHASE control. |
| |||
| PHASE control. | |||
|
|
|
| |
Adjust the sync and subcarrier phases of the output signal from player 1.
Adjusting the Sync and Subcarrier Phases | 93 |
|
|