j SYNC (synchronization) PHASE control | the reference video signal. Use a |
Turn this control to accurately adjust the synchronization | screwdriver to turn it. |
phase of the output video signal of the unit with respect to |
|
aEJECT button
bREW button
c REC button
f STOP button
e F FWD button
dPLAY button
Overview 1 Chapter
aEJECT button
When you press this button, it lights and the cassette is automatically ejected after a few seconds.
bREW (rewind) button
When you press this button, it lights and the tape starts rewinding (maximum 85 times normal speed).
When the F. FWD/REW menu item (see page 63) is set to PB, you can monitor the playback picture during the rewind.
cREC (record) button
When you press the PLAY button while holding down this button, it lights and recording begins.
dPLAY button
When you press this button, it lights and playback begins. If you press this button during recording or editing, the recording or editing operation is stopped and this unit enters playback mode.
eF FWD (fast forward) button
When you press this button, it lights and the tape is fast forwarded (maximum 85 times normal speed).
When the F. FWD/REW menu item (see page 63) is set to PB, you can monitor the playback picture during the fast forward.
fSTOP button
Press this button to stop the current tape transport operation.
Note
No tape transport control buttons other than the EJECT and STOP buttons will work while the REMOTE button in the remote control setting section is lit. This can be changed with the LOCAL ENABLE menu item (see page 63).
Location and Function of Parts | 17 |
|
|