Playback and Recording 2 Chapter
If the following indicators light when a cassette is loaded
Indicator | It means: |
Cassette memory indicator | The loaded cassette contains a cassette memory. |
|
|
ClipLink indicator | There is ClipLink log data stored in the cassette |
| memory on the loaded cassette. |
|
| Caution |
| |
|
| With such a cassette, carrying out recording destroys | ||
|
| the ClipLink log data. | ||
|
| |||
NOT EDITABLE indicator The recording format of the tape is “DV,” or a | ||||
|
| DVCPRO tape is inserted. | ||
|
| Replace the tape with one that has been recorded in | ||
|
| DVCAM format. | ||
|
|
| ||
|
| The audio recording mode selected on this unit does | ||
|
| not coincide with that of the tape. | ||
|
| • | When your current purpose is recording, you can | |
|
|
| use the tape as it is. | |
|
| • | When your current purpose is editing, set the unit | |
|
|
| for the same audio recording mode as with the | |
|
|
| tape. | |
|
|
| For more details, see “Troubleshooting” on page | |
|
|
|
|
To perform the following operations
Operation | Do this: |
|
|
Stop recording. | Press the STOP button. |
| The unit enters stop mode, and will automatically |
| switch to standby off mode after the time period set |
| with the STOP TIMER menu item (see page 68). |
|
|
Remove the cassette. | Press the EJECT button. |
| After a few seconds, the tape is unwound from the |
| head drum and the cassette is automatically ejected. |
| If a CNT value is shown on the time counter display |
| (assuming the time data type indicator “COUNTER” |
| is lit), the CNT value is reset. |
|
|
Inhibit the unit from | Set the CHARA. DISPLAY menu item (see page 65) |
outputting text information | to OFF. |
(time data, operation mode |
|
indications, etc.) to the |
|
video monitor. |
|
|
|
Change the time period | Change the setting of the STOP TIMER menu item |
before the unit switches | |
from stop mode to standby |
|
off mode. |
|
|
|
36 Recording