SHUTTLE indicator in the display section lights, and when playing back in jog mode, the JOG indicator lights. You can carry out noiseless playback in the range of ±1/2 times normal speed.

Playback modes using the search dial

 

 

Playback mode

Operation and functions

 

 

 

 

 

 

 

 

 

 

Shuttle

Press the SEARCH button or the search

 

 

 

 

 

 

dial so that the SHUTTLE indicator in

Chapter

 

 

the display section lights, then turn the

 

 

 

 

 

 

search dial.

1

 

 

Playback is carried out at a speed

 

 

determined by the position of the search

Overview

 

 

SHUTTLE menu item (see page 63).

 

 

 

dial. The maximum shuttle mode

 

 

 

playback speed can be changed with the

 

 

 

 

 

 

Jog

Press the SEARCH button or the search

 

 

 

dial so that the JOG indicator in the

 

 

 

display section lights, then turn the

 

 

 

search dial. Playback is carried out at a

 

 

 

speed determined by the speed of

 

 

 

rotation of the search dial. The playback

 

 

 

speed is up to ±1 times normal speed by

 

 

 

factory default.

 

 

 

The search dial has no detents.

 

 

 

 

You can use the SEARCH ENABLE menu item (see page

63)to select either of the following as the operation to be performed to put the unit into search mode (shuttle or jog).

• Either press the SEARCH button or, except during recording/editing, turn the search dial (factory default setting).

• Press the SEARCH button.

FRemote control setting section

a REMOTE button

b 9PIN button

c i.LINK button

When reverting to local mode to use the buttons in the tape transport control section, press this button again, turning it off.

b9PIN button

When carrying out remote control between this unit and the unit connected to the REMOTE connector, press this button, turning it on.

ci.LINK button

When carrying out remote control between this unit and the unit connected to the DV IN/OUT connector, press this button, turning it on.

Note

When you edit using theDV IN/OUT connector, with video and audio signal input set to “i.LINK” and remote control set to “9PIN”, the locations where edit points are actually set may not be the same as the specified locations. When you set video and audio signal input to “i.LINK”, set remote control to “i.LINK” as well.

aREMOTE button

When remote-controlling this unit from the unit connected to the REMOTE connector (page 25) or DV IN/OUT connector (page 23), press this button, turning it on.

20 Location and Function of Parts