Digitally Dubbing Signals in DVCAM Format

In addition to straightforward tape dubbing, you can also use this unit to dub automatically from the beginning of the tape to the end through the i.LINK interface.

When you dub data recorded by a DVCAM camcorder that supports the ClipLink function, you can also include the data stored in the cassette memory.

Notes

• Use a tape recorded in the DVCAM format. A tape

recorded in DV format cannot be used as a source tape

for dubbing through the i.LINK interface.

SYSTEM MENU

 

Setup menu

 

 

SETUP MENU

 

 

 

AUTO FUNCTION

 

Time counter display

HOURS METER

 

 

 

 

 

 

Monitor screen

2 Press the J or j button to select “AUTO FUNCTION.”

• Regardless of the audio recording mode setting of this

unit, dubbing is performed with the original audio

recording mode unchanged (two-channel/48 kHz mode

or four-channel/32 kHz mode).

• Approximately the last 2 minutes of the tape may not be

copied because of differences in tape lengths. (If an

index picture is recorded in this portion, it may also not

be copied.)

• A continuous recorded section of approximately 5

seconds is required before the recording start point. It is

recommended to record beforehand color bars or a

similar signal at the start point of the source tape to be

SYSTEM MENU SETUP MENU

AUTO FUNCTION

HOURS METER

Monitor screen

Auto func

Time counter display

Convenient 3 Chapter

dubbed on this unit.

Connections for dubbing via i.LINK interface To carry out dubbing through the LINK interface, connect the i.DV IN/OUT connectors on this unit and the player.

Use the following procedure.

 

A

B

 

 

 

MARK

 

1,9

2,4

3,4,5

7

1 Press the MENU button on the menu control panel.

3 Press the k button.

This displays the items in the level 1 of the auto mode execution menu.

AUTO FUNCTION MENU

 

i.LINK DUB

 

 

i.LINK DUBBING

 

 

 

 

TC INSERT

 

Time counter display

 

 

 

 

 

Monitor screen

4 Press the k button to display the menu level 2 for the item “i.LINK DUBBING,” and select the data to be dubbed with the j button.

Operation Editing for Functions

Digitally Dubbing Signals in DVCAM Format 55