Using alternative power sources

Charging the attached battery pack

After connecting the power cord to the wall outlet and setting the POWER switch on the digital camcorder to OFF, you can charge the battery pack in either of the following two ways:

•Charging the battery pack attached to the digital camcorder

Leave the battery pack attached to the digital camcorder. (The NP-F950 battery pack (not supplied) requires about 390 minutes for a full charge and about 330 minutes for a normal charge.)

While charging, the battery indicator appears repeatedly in the display window:

•Charging two battery packs at the same time

Attach one battery pack to the AC power adaptor and the other to the digital camcorder. Both are charged simultaneously. When charged, CHARGE lamp and the

ıindicator goes out (normal charge). If either lamp is still lit, both battery packs are not charged (the NP-F950 battery packs (not supplied) require about 480 minutes for a full charge and about 420 minutes for a normal charge).

To remove the adaptor

Pull out by the plug. Never pull on the connecting cord itself.

WARNING

The power cord must only be changed at a qualified service shop.

PRECAUTION

The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off.

Notes on the VTR/CAMERA lamp

•The VTR/CAMERA lamp will remain lit for a while even if the unit is unplugged after use. This is normal.

•If the VTR/CAMERA lamp does not light, disconnect the power cord. After about one minute, reconnect the power cord.

This mark indicates that this product is a genuine accessory for Sony

video products.

When purchasing Sony video products, Sony recommends that you purchase accessories with this “GENUINE VIDEO ACCESSORIES” mark.

operations Advanced

39