Attaching optional accessories

Attaching the external microphone with XLR connector

When using the ECM-672 external microphone (not supplied), attach the CAC-12 microphone holder (not supplied) to the digital camcorder.

(1) Remove the screws from the top of the viewfinder.

Remove the spacer from the screws. They are unnecessary when attaching the microphone holder.

(2) Attach the microphone holder with the supplied washers and the screws removed in step (1).

(3) Loosen the microphone holder screw and open the cover.

(4) Place the microphone into the holder, close the cover, and tighten the screw.

(5) Connect the microphone to the AUDIO IN jacks of the digital camcorder, then set LINE/MIC to MIC REAR.

12 3

4

5

LINE/

MIC

AUDIO IN

18