Trouble check
Symptom | Cause and/or Corrective Actions |
The tape does not move when a video control button is pressed.
•CAMCORDER/VTR is set to CAMCORDER. mSet it to VTR. (p. 36)
•The tape has run out.
mRewind the tape or use a new one. (p. 36)
•The digital camcorder is updating the cassette memory data (only for DVCAM cassettes with cassette memory).
mEject the cassette after the C MEMORY indicator disappears (p. 25).
The Steady Shot function does not | • STEADY SHOT is set to OFF. |
activate. | mSet STEADY SHOT to ON. (p. 68) |
The autofocusing function does | • FOCUS is set to MANU. |
not work. | mSet it to AUTO. (p. 53) |
| • Shooting conditions are not suitable for autofocus. |
| mSet FOCUS to MANU to focus manually. (p. 52) |
The microphone does not work | • LINE/MIC is set to LINE. |
while recording. | mSet it to MIC FRONT or MIC REAR. |
• DIRECTION SELECT is set to 0°. | |
not record in stereo when | mSet it to 90° or 120°. (p. 29) |
monitoring by headphone or line |
|
out jacks. |
|
Audio dubbing does not work. | • The signal of recording tape is no condition to operate |
| audio dubbing. |
| mDub the tape into another DVCAM cassette in Fs 32k |
| using A/V connecting cable. (p. 29) |
Excessive | • The picture has been recorded with |
heard when recording using the | WIND. |
mWhen there is no wind, set it to off (green position). | |
| (p. 67) |
The recording sound is weak or is | • AUDIO MIX in the menu is set to ST2. |
not heard. | mSet it to ST1. (p. 40) |
The date and time indicator | • Reset the date and time. (p. 80) |
disappears. |
|
The overlap function does not | • Set DIGITAL F in the menu to OVERLAP. (p. 40) |
work. |
|
D ZOOM or 16:9WIDE mode in | • Set DIGITAL F in the menu to ZOOM/WIDE. (p. 40) |
the menu system cannot be set to |
|
ON. |
|
The slow shutter does not work. | • Set DIGITAL F in the menu to ZOOM/WIDE. (p. 40) |
| (to be contunued) |
information Additional
91